Boyle's Law Isotherms


1. What labels for the vertical and horizontal axess would be consistent with the plot in the figure below if the plot represents an ideal gas isotherm?

Answer: if the plot represents an ideal gas isotherm, the shape of the plot suggests that the quantities are inversely proportional at constant temperature.  The plot is P vs. V, or V vs. P.  This assumes the bottom left corner is the origin.


2. What labels for the vertical and horizontal axes would be consistent with the plot in the figure below if the plot represents an ideal gas isotherm?
Answer: if the plot represents an ideal gas isotherm, the shape of the plot suggests that the quantities plotted on the axes are directly proportional at constant temperature.  Possible answers: P vs. (1/V), (1/V) vs. P,  (1/P) vs V, V vs. (1/P).  This assumes the bottom left corner is the origin.





Barometric Pressure


Barometers and Manometers


1. Illustrated below is a mercury barometer. If the height, h, of the mercury column is 0.7535 m, what is the pressure of the atmosphere in atm?


Hint: convert m to mm, then multiply by (1 atm / 760 mm)

2. Illustrated below is a setup for measuring the pressure of a gas. The gas is hooked up to a mercury manometer. Suppose that a perfect vacuum is above the mercury column on the right side and the difference in the height of the columns is 0.1844 m. Calculate the pressure of the gas in cm Hg. 

Hint: Since this is a close-end manometer, the pressure of the gas is simply equal to the difference in the height of the liquid columns


3. Illustrated below is a setup for measuring the pressure of a gas. The gas is hooked up to a mercury manometer; the mercury column on the right side is open to the atmosphere and the difference in the height of the columns is 0.1844 m. Calculate the pressure of the gas in cm Hg if the barometric pressure is 758.4 Torr.

Hint: from the picture, you can tell that the pressure of the gas is higher than the barometric pressure; it pushes down harder on the mercury column.  The difference in the barometric pressure and the pressure of the gas is equal to the difference in heights of the mercury levels.  You add the height of the mercury column to the barometric pressure to get the gas pressure.

4. Illustrated below is a setup for measuring the pressure of a gas. The gas is hooked up to a mercury manometer; the mercury column on the right side is open to the atmosphere and the difference in the height of the columns is 0.1316 m. Calculate the pressure of the gas in cm Hg if the barometric pressure is 758.4 Torr. 

Hint: from the picture, you can tell that the pressure of the gas is lower than the barometric pressure; it does not push down as harder on the mercury column.  The difference in the barometric pressure and the pressure of the gas is equal to the difference in heights of the mercury levels.  You subtract the height of the mercury column to the barometric pressure to get the gas pressure.



Chem Q&A

This is the index for Chemistry Q&A videos developed by Dr. Glenn V. Lo, faculty colleagues (Ms. April Dupre, Dr. Vincent Giannamore, Ms. Cynthia Lamberty, and Dr. Jeremy Wessel) and students at Nicholls State University (Department of Physical Sciences). The development of most of these videos is funded through Project VALUE (Video Assessment Library for Undergraduate Education) by the Louisiana Board of Regents SELECT Grants Program (Contract No. LA-DL-SELECT-13-07/08). Other videos were developed by students for honors credit in Chemistry courses at Nicholls.

LEARNING OBJECTIVES

PART I. INTRODUCTORY CONCEPTS
1-1 Differentiate hypothesis, observation, theory, and law, 1-2Differentiate physical states of matter in terms of shape, volume (compressibility), intermolecular distances, molecular motion, 1-3Describe separation techniques for samples of matter, 1-4Differentiate elements, compounds, and mixtures, 1-5 Write correct symbols for elements, 1-6 Classify elements based on their location in the periodic table, 1-7 Describe naturally-occurring forms of elements, 1-8 Describe the law of conservation of matter (mass), 1-9Describe and apply the law of definite composition, 1-10 Describe basic atomic structure (subatomic particles), 1-11 Interpret symbols for isotopes, 1-12 Describe how isotopes can be separated, 1-13Describe how the currently accepted model of the atom evolved from Dalton through Rutherford, 1-14 Describe how ions are formed from atoms, 1-15 Classify ions as cations or anions, 1-16 Interpret symbols and formulas of ions, 1-17 Predict stable monatomic ions formed from atoms, 1-18 Differentiate and predict ionic and covalent bonding, 1-19 Describe and differentiate molecules and polyatomic ions, 1-20 Interpret formulas of molecules and polyatomic ions, 1-21Classify polyatomic ions as oxoanions or non-oxoanions, 1-22Read/write formulas of polyatomic ions, 1-23 Classify compounds as molecular or ionic, 1-24 Write formulas of molecular and ionic compounds based on a description of the atoms or ions that make up a formula unit, 1-25 Differentiate ionic and molecular compounds in terms of physical properties, 1-26 Read and write formulas of binary compounds, 1-27 Read and write formulas of compounds containing polyatomic ions, 1-28 Read and write formulas of acids, 1-29 Describe and differentiate physical and chemical changes/properties, 1-30Identify reactants and products of a chemical reaction, 1-31 Construct a balanced chemical equation, 1-32 Classify and predict products of simple reactions

PART 1A. MEASUREMENTS
1A-1 Interpret SI prefixes, 1A-2 Identify significant figures in properly reported measurements, 1A-3 Relate uncertainty (precision) to how measurements are reported, 1A-4 Properly round off results of calculation involving measurements, 1A-5 Convert units, 1A-6Convert temperature readings, 1A-7 Convert temperature differences or changes, 1A-8 Solve problems dealing with measurements of physical properties (mass, volume, density, temperature, heat, heat capacity, solubility)

PART 2. ATOMIC STRUCTURE.
2-1 Describe electromagnetic radiation in terms of waves and photons, 2-2 Describe the Bohr model and relate to atomic spectra, 2-3 Describe orbitals and rules for assigning electrons to orbitals, 2-4Write or identify ground state and excited state electron configurations, 2-5 Relate (ground-state) electron configuration of an atom to its location in the periodic table, 2-6 Relate properties (size, ionization energy) of an atom to its location in the periodic table, 2-7Relate electron configuration and properties of ions to the parent atoms' location in the periodic table

PART 3. MOLECULAR STRUCTURE
3-1 Relate electronegativity to location of atom in the periodic table,3-2 Relate electronegativity and bond polarity, 3-3 Write and interpret Lewis dot symbols, 3-4 Interpret Lewis structures, 3-5 Draw Lewis structures, 3-6 Recognize and differentiate resonance and isomeric structures, 3-7 Determine formal charges, 3-8 Use formal charges and electronegativity to assess feasibility of a structure or extent of contribution to a resonance hybrid, 3-9 Recognize exceptions to the octet/duet rule, 3-10 Relate bond length to bond order and atomic sizes, 3-11 Describe molecular geometry using VSEPR, 3-12 Predict molecular polarity, 3-13 Describe intermolecular forces and relate to molecular structure and properties, 3-14 Use valence bond theory to explain molecular geometry, 3-15 Apply molecular orbital theory to diatomic molecules

PART 4. MOLE CONCEPT, STOICHIOMETRY
4-1 Distinguish between masses of individual atoms and average masses, 4-2 Define mole and Avogadro number, 4-3 Relate mole count to individual count, 4-4 Count atoms and molecules in molecular compounds or ions in an ionic compound, 4-5 Relate moles and mass of pure substances, 4-6 Determine amount of element present in a compound, 4-7 Determine empirical and molecular formulas, 4-8Relate amounts of reactants and products in a chemical reaction, 4-9Determine limiting reactant and theoretical yield, 4-10 Determine amount of unreacted excess reactant

PART 5. SOLUTIONS AND AQUEOUS REACTIONS
5-1 Differentiate solutions from compounds, 5-2 Differentiate solution, colloids, suspensions, and coarse mixtures, 5-3 Describe the dissolution of ionic and molecular compounds in water, 5-4 Classify solutions as saturated, supersaturated or unsaturated, 5-5 Classify ionic compounds as soluble or insoluble in water, 5-6 Recognize chemical equations for precipitation reactions, 5-7 Predict if a precipitation reaction could occur, 5-8 Write net ionic equations for precipitation reactions, 5-9 Describe strong and weak acids, 5-10Write chemical equations to represent ionization of acids in water, 5-11 Describe strong and weak bases, 5-12 Write chemical equations to represent acid-base reactions, 5-13 Write net ionic equations to represent acid-base reactions, 5-14 Calculate amount of solute given volume and molarity of solutions, 5-15 Calculate molarity of solutions and of ions in solution, 5-16 Solve dilution problems, 5-17 Solve stoichiometry problems involving solutions

PART 6. SOLIDS, LIQUIDS, AND GASES
6-1 Relate gas pressure to heights of liquid columns, 6-2 Relate Pressure, Volume, Temperature, and moles of gas, 6-3 Determine molar mass of a gas from density, Pressure, and Temperature data,6-4 Identify and apply empirical gas laws, 6-5 Apply Dalton's Law of partial pressures, 6-6 Solve stoichiometry problems involving gases,6-7 Interpret pressure and temperature in terms of molecular motion,6-8 Use Graham's law of effusion to compare effusion rates and determine molar mass of gas, 6-9 Describe and interpret real gas behavior, 6-10 Interpret one-component phase diagrams, 6-11Describe solid structure

PART 7. REDOX REACTIONS
7-1 Classify half reactions as reduction or oxidation, 7-2 Assign oxidation numbers, 7-3 Differentiate oxidation number from charge,7-4 Identify atoms oxidized or reduced based on oxidation numbers,7-5 Balance a redox reaction using oxidation number method, 7-6Balance redox half reactions in aqueous solution, 7-7 Construct a balanced redox reaction given two balanced half reactions

7-7 Construct a balanced redox reaction given two balanced half reactions

7-6 Balance redox half reactions in aqueous solution

7-6-1. Consider the half-reaction (unbalanced) in acidic solution:
HClO2(aq) ==> Cl2(g)
When this half reaction is balanced using the smallest set of whole number coefficients, what is the coefficient of H+(aq) and how many electrons are involved?


7-6-2. Consider the half-reaction (unbalanced) in basic solution:
ClO2-(aq) ==> Cl2(g)
When this half reaction is balanced using the smallest set of whole number coefficients, what is the coefficient of OH-(aq) and how many electrons are involved


7-6-3. When the following half reaction
H2SO3(aq) ==> SO4 2-
is balanced in acidic solution using the smallest of whole numbers, what is the coefficient of H2O and how many electrons are involved?
A. 1, 2 B. 1, 3 C. 2, 3 D. 3, 1




7-6-4. Which of the following is a reduction half reaction?

A.SO2 (g) ==> SO32-(aq)
B.SO42-(aq) ==> SO32-(aq)
C.S2-(aq) ==> SO32-(aq)

7-5 Balance a redox reaction using oxidation number method

7-5-1. When the following chemical equation is balanced, what is the ratio of the coefficients of NO and Cu(NO3)2?
Cu(s) + HNO3(aq) ==> NO(g) + Cu(NO3)2(aq) + H2O(l)
A. 1:1, B. 1:2, C. 2:1, D. 2:3, E. 3:2



7-5-2. When the following chemical equation is balanced, what is the ratio of the coefficients of MnCl2 and Cl2?
KMnO4 (s) + HCl (aq) ==> MnCl2(aq) + Cl2(g) + KCl(aq) + H2O(l)
A. 1:2, B. 2:3, C. 2:4, D. 1:5, E. 2:5

7-3 Differentiate oxidation number from charge

7-3-1. Which of the following is false?
A. The charge of mercury in mercury one is +1
B. The oxidation number of mercury in mercury one is +1
C. The charge of mercury in mercury two is +2
D. The oxidation number of mercury in mercury two is +2



7-3-2. Which of the following is false?
A. The charge of oxygen in carbon monoxide is -2
B. The oxidation number of oxygen in carbon monoxide is 2
C. The charge of oxygen in Magnesium Oxide is 2
D. The oxidation number of oxygen in magnesium oxide is -2

7-1 Classify half reactions as reduction or oxidation

7-1-1. In a reaction where magnesium metal reacts to form a compound, magnesium is said to be
A. oxidized, B. reduced, C. the oxidizing agent



7-1-2. When Cl2 (g) reacts with a metallic element to form an ionic compound, we say that chlorine is
A. oxidized, B. reduced, C. the reducing agent



7-1-3. When Br2(l) is produced from the reaction involving a bromine-containing binary ionic compound, the half reaction leading to the formation of Br2 is classified as
A. oxidation, B. reduction,
C. oxidation or reduction depending on what the compound is

6-11 Describe solid structure

6-10 Interpret one-component phase diagrams

5-16 Solve dilution problems

5-16-1. Consider a 0.500 NaOH(aq). If enough water is added to a 10.0 mL sample of this solution in order to bring up the total volume to 100.0mL, what is the molarity of the resulting solution?
A. 0.0500M
B. 1.00 M
C. 2.00M
D. 5.00M


5-16-2. How much water should be added to a 100.0mL sample of 6.000M NaOH in order to dilute the solution to 3.000M?
A. 100.0 mL
B. 200.0 mL
C. enough to bring the total volume to 200.0 mL
D. none of the above

6-9 Describe and interpret real gas behavior

6-9-1. A gas occupies a volume of 22.0 L/mol at STP. Which of the
following explains the deviation from ideal behavior?
A. predominance of attractive forces among the molecules
B. predominance of repulsive forces among the molecules
C. absence of attractive forces among the molecules
D. absence of repulsive forces among the molecules



6-9-2. A 2.00 mol sample of gas occupies a volume of 11.0 L at 298K and 5.00 atm. These values suggest that…
A. the gas is behaving ideally
B. the gas is not behaving ideally and the deviation is due to
predominance of attractive forces
C. the gas is not behaving ideally and the deviation is due to
the predominance of repulsive forces



6-9-3. The compression factor for a 2.50 L gas sample is 1.20. If the gas were ideal, at the same temperature and pressure, the volume would be
A. higher than 2.50 L,
B. smaller than 2.50 L,
C. the same,
D. different, but information is insufficient



6-9-4. The compression factor for a gas sample is 0.90; its pressure is 20.0 atm. If the gas were ideal, at the same temperature and volume, the pressure would be
A. higher than 20.0 atm, B. lower than 20.0 atm, C. the same,
D. different, but information is insufficient

6-8 Use Graham's law of effusion to compare effusion rates and determine molar mass of gas

6-7 Interpret pressure and temperature in terms of molecular motion

6-6 Solve stoichiometry problems involving gases

6-6-1. A piece of Mg ribbon is reacted with hydrochloric acid. If 224 mL of hydrogen gas is produced at 25.0oC, 1.00 atm, how much HCl was consumed? The reaction is:
Mg(s) + 2 HCl(aq) == MgCl2(aq) + H2(g)




6-6-2. Consider the combustion of urea:
2 CO(NH2)2 (s) + 3 O2(g) == 2 CO2(g) + 2 N2(g) + 4 H2O(l)
Suppose 3.00 g of urea were burned in excess oxygen in a fixed-volume 1.00-L sealed container that initially contained 2.00 atm of O2 at 298K. Estimate the final pressure in the container at
298K?



6-6-3. Consider the hypothetical reaction:
2 A(g) == B(g) + 3 C(g)
Suppose a fixed-volume container initially contains 2.00 mol of pure A(g) at a pressure of 0.500 atm. Hours later, the pressure, at the same temperature, is found to be 0.800 atm. How many moles of B(g) are present in the final mixture?

6-5 Apply Dalton's Law of partial pressures

6-5-1. Hydrogen gas is collected over water at 25oC. The vapor pressure of water at this temperature is 23.8 Torr. If the total pressure of the gas is 755.0 Torr, what is the partial pressure of hydrogen?
A. 731.2 Torr, B. 778.8 Torr, C. 23.8 Torr, D. None of the above


6-5-2. A 5.0 mg sample of gas "X" is found to have a pressure of 0.100 atm at 298K in a given container. A 10.0 mg sample of gas "Y," placed in the same container is found to have a pressure of 0.150 atm at 298K. What would be the total pressure of a mixture of 5.0 mg "X" and 10.0 mg "Y" in the same container at 298K? (assume no reaction)
A. 0.050 atm, B. 0.105 atm, C. 0.250 atm, D. 2.0 atm


6-5-3. A mixture containing 0.200 mol H2 and 0.300 mol N2 has a total pressure of 720.0 Torr. What is the partial pressure of H2 in the mixture?
A. 144 Torr, B. 216 Torr, C. 288 Torr, D. 360 Torr

6-4 Identify and apply empirical gas laws

6-4-3. What is the final volume of a gas, originally at (25.0 L, 25.00oC) if it is heated to 50.00oC at constant pressure?
A. 12.5 L, B. 27.1 L, C. 50.0 L


6-4-4. What is the final pressure of a gas, originally at (30.0 L, 250.0 Torr) if it is compressed to 15.0 L at constant temperature?
A. 125 Torr, B. 235 Torr, C. 280 Torr, D. 500 Torr


6-4-5. What is the final volume of a gas, originally at (30.0 L, 250.0 Torr, 25oC) if its pressure and temperature are changed to (500.0 Torr, 115oC)?
A. 19.5 L, B. 46.0 L, C. 69.0 L, D. 78.1 L

3-15 Apply molecular orbital theory to diatomic molecules

6-1 Relate gas pressure to heights of liquid columns

6-1-1. What is the pressure due to a vertical column of mercury that is 760.0 mm long?
760.0 Torr, B. 760.0 Pa, C. 760.0 atm, D. 760.0 bar


6-1-2. What is the pressure due to a vertical column of water that is 760 mm long? (use the following densities: water 1.00 g/mL, Hg is 13.6 g/mL)
A. 7.6 x 102 Torr, B. 1.0 x 105 Torr, C. 7.4 x 10-2 atm


6-1-3. A gas bulb is connected to an open-end mercury manometer and the liquid level in the arm connected to the gas bulb is found to be 15.0 cm lower than in the arm that is open to the atmosphere. The prevailing barometric pressure is 755 mm Hg. What is the pressure of the gas in the bulb?
A. 905 Torr, B. 770 Torr, C. 740 Torr, D. 605 Torr


6-1-4. A gas bulb is connected to an open-end mercury manometer and the liquid level in the arm connected to the gas bulb is found to be 20.0 mm higher than in the arm that is open to the atmosphere. The prevailing barometric pressure is 758 mm Hg. What is the pressure of the gas in the bulb?
A. 778 Torr, B. 760 Torr, C. 756 Torr, D. 738 Torr